Installing a new program in your Prime Equipment Group machine’s Schneider unit is simple, using these step-by-step instructions

If you have not done so already, download the Schneider HMI panel program for your machine by selecting the proper file here. Save it to a USB drive, and take that drive with you to the machine. Then:

1. Insert the USB Flash Drive containing the program files into the USB slot on the bottom of the Schneider unit, inside the box, as below.

Schneider Unit USB

2. You will be asked “Do you want to install a new project from the USB drive.” Tap “Yes” as below.

Schneider Yes

3. After the program is loaded, you will see the screen below. Remove the USB drive, and press “Restart.”

Schneider Restart


We’re here to help every step of the way.